KGP-920
Chapter 9
How to use LOPs
Present position
Actual position (to be entered)
Correction position
Present position (GPS fix)
Actual position (to be entered)
Correction offset
Secondary st. –00:20 usec
Green st.1 0G:30:42 usec
Secondary st.1 0G:30:42
Secondary st. +00:19 usec
Purple st.2 0C:76:35 usec
Secondary st.2 0C:76:35
9.3.3 Checking the correction offset
Example: Loran C
You can check the correction offset as follows:
Correction data
(to be entered)
The correction
offset
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
5
] key to select “
5:COMP.
”.
(3) Press [
2
] key to select “
2:LOP
”.
9.3.4 Disable position correction
To delete and disable the correction offset follow these steps:
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
Example: Decca
(2) Press [
5
] key to select “
5:COMP.
”.
Correction data
(to be entered)
Position correction
Has been cleared
(3) Press [
1
] key to select “
1:LAT/LON
”.
(4) Press [
CLR
] key to set correction offset to 0 correction
is disabled.
93121662-00
9-9