Chapter 4 KGP-920
Installation
4-6
0093121662-08
4.6.4 Waterproofing on the connector jointing section
(1)
Wind the self-fusible tape around the jointing section.
Pull the tape end to stretch its length to be doubled and wind it overlaid by half to 3 plies. When winding
is completed, apply gentle pressure over the surface with fingers to expedite the fusion.
(2)
Apply windings of PVC tape to reinforce the protection.
PVC tape should not be strained. Wind it overlaid by half to 3 plies. When finished, press the surface
evenly without strain for complete adhesion of the tape.
Figure. 4.5 Processing on the coax cable jointing section
Self-fusible tape
PVC tape for protection
Connectors