KGP-920
Chapter 6
Various Navigation
93121662-00
6-3
6.1.4 Changing comment I.D.
You can change a comment stored in memory.
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
1
] key to select “
1:WAYPOINT
”.
(3) Enter storage number (001 to 399) using numeric keys.
(4) Press [
ENT
] key. The storaged number data will appears.
(5) Press [ ] key twice to move cursor to the comment field.
(6) Press [ ] [ ] [ ] [ ] key to select a comment letter or symbol from the comment letter
table by locating cursor on it, or enter a value using numeric keys.
(7) Press [
SEL
] key . And one letter or symbol are made to decide.
(8) You can enter up to 10 letters by repeating (6) and (7) steps.
(9) Press [
ENT
] key and decide of a comment.
6.1.5 Erasing a single waypoint
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
1
] key to select “
1:WAYPOINT
”.
(3) Enter storage number (001 to 399) using numeric keys.
(4) Press [
ENT
] key. The storaged number data will appears.
(5) Press [
CLR
] key. A confirmation message will apprars.
(6) If OK, press [
ENT
] key to erase the data from storage. If cancel erasing, press [
CLR
] key.
Comment field
Storage number
LAT/LONG mode (Example)
Table of comment
letters and symbols
Changed comment
Data to erase
Storage number
A confirmation message
Display after data erasure
LAT/LONG mode (Example)
NOTE:
To erase an entire data from memory
simultaneously, see “Erasing entire
data from memory” (page 63).