KGP-920
Chapter 6
Various Navigation
93121662-00
6-5
6.2.3 Reentering the starting point in waypoint navigation
Once reset, the present position is used as the new point of origin for waypoint navigation.
While the 1st to 4th pages of either the A (NAV 1), B (NAV 2), C (NAV 3) or D (PLOT), are
displayed.
(1) Press [ENT] key to set the point as WPT.
6.2.4 Canceling waypoint navigation
To cancel waypoint navigation, turn WPT to OFF on A (NAV1), B(NAV2), C (NAV3) or D (PLOT)
screen.
(1) Press [
MODE
] key until
A
(NAV1),
B
(NAV2),
C
(NAV3) or
D
(PLOT) screen appears.
(2) Press [
SEL
] key until page 5 screen appears.
(3) Press [ ] [ ] key to move cursor to the "
RESET
" letters.
(4) Press [
ENT
] key to cancel WPT setting.
6.2.5 B (NAV2) screen during waypoint navigation
“ON” letters are displayed, and number are cleared.
Time to go from present
position from WPT
WPT position
Page number
Arrival time
(mm/dd hh:mm)
Distance from present
position from WPT
WPT position
Page number
Bearing from present
position from WPT
WPT mark
Cross track error
WPT position
Deviation angle
Page number
Speed
Present position
Course
Page number
WPT number
Range(Radius) of navigation graph
Blinks when position fix is unavailable
NOTE: To change a display page:
Press this key
SEL