Chapter 6
KGP-920
Various Navigation
6-22
93121662-00
6.7.3 Scaling the PLOT screen
You can select a display scale of PLOT (pages: 1, 2, 4) screen.
(1) Press to [ ] or [ ] key to select a desired range.
The range that can be changed is as follows.
( 0.25, 0.5, 1, 2, 5, 10, 20, 50, 100, 200 )
6.7.4 Changing the setup contents
(1) Press [
MODE
] key until
D
(PLOT) screen appears.
(2) Press [
SEL
] key until page 6 screen appears.
(3) Press [ ] or [ ] key to locate cursor and select an item.
(4) Press to [
ENT
] key to display the option.
(5) Press [ ] or [ ] key to locate cursor and select an option.
(6) Press [
ENT
] key.
Selected option is setup.
(Changing the event symbol)
To change the event symbol, place cursor on
SYMBOL
option and press
ENT
key.
(Activating event numbers (000 to 199))
Turn
ON
the
EVENT
option and you can save events (the present position marking) into memory
numbers (000 to 199).
(Activating event numbers (200 to 399))
Turn
ON
the
WAYPOINT
option and save events (the present position marking) into memory numbers
(200 to 399).
(On/off of course line (dotted lines))
During waypoint or route navigation, you can display or clear the course line from your present position
to the waypoint.
Initial scale: 0.025
Scale indication fields
NOTE: You can change the scale unit from Menu 2: UNIT (nm) of 8: INITIAL options
.
Cursor
Page number
Initial setup: +
Initial setup: ON
Initial setup: ON
Initial setup: ON