Chapter 7
KGP-920
Alarms
7-2
93121662-00
7.1.3 Cross track error alarm (XTE)
The cross track error (XTE) alarm alerts you when you have deviated from your course line by a
predetermined distance. The alarm function does not work if the alarm range is set to '0.00'. The course
width shown on NAV3 screen is the same as the XTE alarm value you have set.
XTE
letters blink and
buzzer (long beep) sounds when I’m away from XTE range.
7.1.4 Course deviation angle alarm (CDI)
The CDI alarm alerts you when you deviate from your course to steer by a predetermined margin.
The alarm function does not work if the alarm range is set to “00”.
CDI
letters blink and buzzer (long
beep) sounds when I’m away from CDI range.
7.2 Alarm explanation
The reason of an alarm can be seen in the following ways.
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
6
] key to select “
6:ALARM
”.
(3) Press [
5
] key to select “
5:MESSAGE
”. Reason for alarm notification is displayed
Waypoint or
route point
Present alarm range
Course line
Origin
Cross track error (XTE)
Initial setup: ON, 1.00
Enter an alarm range: 0.00 to 9.99
Waypoint or route point
Course
Course deviation angle (CDI)
Bearing to waypoint
Initial setup: ON, 45 degrees
Enter an alarm range: 00 to 99 degrees
Blink
Blink