KGP-920
Chapter 8
Setup Procedure
93121662-00
8-13
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
5
] key to select “
5:COMP.
”.
(3) Press [
3
] key to select “
3:MAG.V
”.
(4) Press [ ] or [ ] key to move cursor onto “
AUTO
” .
(5) Press [
ENT
] key.
(Manual compensation)
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
5
] key to select “
5:COMP.
”.
(3) Press [
3
] key to select “
3:MAG.V
”.
(4) Press [ ] or [ ] key to move cursor onto “
MANUAL
” .
(5) Press [
ENT
] key.
(6) Press [ ] key .
(7) Press [
SEL
] key to change the positive (+) or negative (-) sign of correction offset.
or
(8) Press [
0
] key to use the current positive (+) or negative (-) sign as it is.
(9) Enter a (4-digit) compensation offset using numeric keys.
(10) Press [
ENT
] key.
8.4.5 Displaying local time
Initial setup: 00:00 hour
You can display your local time by entering a time difference from the Greenwich Mean Time (GMT).
See the following figure 8.1 to determine zone time difference.
(1) Press [
MENU
] key until Menu options 1 to 9 appears.
(2) Press [
5
] key to select “
5:COMP.
”.
(3) Press [
4
] key to select “
4:TIME
”.
(7) Press [
SEL
] key to change the positive (+) or negative (-) sign of correction offset.
or
(8) Press [
0
] key to use the current positive (+) or negative (-) sign as it is.
(9) Enter a time difference from GMT using numeric keys.
(10) Press [
ENT
] key.
initial setup: 0.0
o
Setup range: -180.0° to +180.0°
NOTE:
Press to clear incorrect
Input. You can reenter
Numeric data.
CLR
An error (compensation amount)
From true bearing is shown
An error (compensation amount)
From true bearing is shown