KGP-920
Chapter 8
Setup Procedure
93121662-00
8-21
MANUAL:
Press the
EVT
key, then specify desired registration numbers (in the range of 001
to 199) from the numerical keypad.
8.7.5 Selecting an initial value (North, South, East, West) of latitude/longitude
Initial setup: N/W
N/W (N. Lat./W. Long.): When power is turned on, GPS or DGPS position measurement is
started using the north latitude/west longitude region as the initial
value.
N/E (N. Lat./E. Long.): When power is turned on, GPS or DGPS position measurement is
started using the north latitude/east longitude region as the initial
value.
S/W (S. Lat./W. Long.): When power is turned on, GPS or DGPS position measurement is
started using the south latitude/west longitude region as the initial
value.
S/E (S. Lat./E. Long.): When power is turned on, GPS or DGPS position measurement is
started using the south latitude/west longitude region as the initial
value.
In the
MANUAL
mode, you can
specify desired registration numbers
.