MDC-2000 Series
Chapter 1 Basic Operation
0093120005-02
1-8
1.8
STC Adjustment
In the short distance menu, even if waves are
low and the sea surface is calm, an echo
reflected from the sea surface appears in the
image.
When waves become high, the sea surface
reflected echo covers around the center of the
image and make it harder to see targets.
Adjust the STC to suppress the reflection from
the sea surface so that the image becomes
visible easily.
STC Adjustment
1
When rotating clockwise the [STC] knob, the
reflection suppressing effect becomes
stronger.
●
When not influenced by waves, rotate fully
counterclockwise the [STC] knob.
●
This function reduces the gain at short
distance. If rotating clockwise the [STC] knob
too much, desired targets disappear.
Own ship
Land
<Picture of adjusted STC>
<Picture of too much STC>
Own ship
Land
<Picture with sea clutter>
Picture after adjustment with [STC] knob
Own ship
Land
In the PPI/PPI menu, when rotating the [STC]
knob, the STC functions effective in both
displays.
1.9
Use of [F1] and [F2] keys
The following functions can be assigned to the
[F1] and [F2] keys.
●
[FTC]
●
[MODE]
●
[DISPLAY SELECT]
●
[OFF CENTER]
●
[ENHANCE]
●
[TRAIL TIME]
●
[EBL]
●
[VRM]
●
[COLOR]
●
[PI]
●
[ALARM MODE]
●
[ACQ]
●
[DELETE]
●
[POB]
●
[TARGET]
●
[OTHER SHIP]
●
[PULSE]
●
[PROCESS]
Refer to the F1/F2 keys set in 3.5 Preset.
The assigned function is displayed at the upper
right side of the screen.
How to use [F1] and [F2] keys
When pressing the [F1] / [F2] key, the assigned
function works.
Function Operation
FTC
When pressing the [F1] / [F2] key, the
setup of FTC changes.
Mode
When pressing the [F1] / [F2] key, the
display mode changes.
Display Select
When pressing the [F1] / [F2] key, the
display changes.
Off Center
After pressing the [F1] / [F2] key, if [ ]
or [ ] key is pressed, the ON/OFF
setup of the OFF CENTER changes.
After pressing the [ ] key with ON
selected and moving the crosshair
cursor, if the [ENT] key is pressed, the
position of crosshair cursor is set as a
position of own ship.
Enhance
When pressing the [F1] / [F2] key, the
setup of ENHANCE changes.
<Picture of too low STC>
Summary of Contents for MDC-2000 series
