MDP-621/641/640
Chapter 10
Operation manual
MENU operation
0093161022-06
10-1
Chapter 10 MENU Operation
The screens of the Plotter, Radar, Sounder, Navigation Data (NAV) and System are contained in the
MENU (The initial settings screen activated by the menu key) where the adjustments and presets
associated with setting up each screen can be found.
10.1 Operating the MENU
10.1.1 Displaying the MENU screen
Each MENU is displayed using the following procedures.
(1) Displaying the PLOTTER MENU
When the Plotter is active (When the FUNC key of the soft menu reads PLOTTER), press the
“MENU” key.
(2) Displaying the RADAR MENU
When the Radar is active (When the FUNC key of the soft menu reads RADAR), press the
“MENU” key.
(3) Displaying the SOUNDER MENU
When the Sounder is active (When the FUNC key of the soft menu reads SOUNDER), press the
“MENU” key.
(4) Displaying the NAV MENU
When the NAV is active (When the FUNC key of the soft menu reads NAV), press the “MENU”
key.
(5) Displaying the SYSTEM MENU
Press the “MENU” key to display each menu for the Plotter, Radar, Sounder and NAV.
Then, Press the “SYSTEM” key of the soft menu and the menu will change to the SYSTEM
MENU.
SYSTEM
0 Buzzer Set
1 Display
2 Source Set
3 Correction
4 Cursor Type
5 Area Set
6 Simulation
7 Language
8 Network Setup
9 System Check
When Plotter menu is active ”PLOTTER” is displayed.
When Radar menu is active ”RADAR” is displayed.
When Sounder menu is active ”SOUNDER” is displayed.
When NAV menu is active ”NAV” is displayed.
PLOTTER
SYSTEM
ENTER
RETURN
If the “PLOTTER”
key is
pressed, the menu will change
to the PLOTTER MENU.
If the “SYSTEM”
key is
pressed, the menu will change
to the SYSTEM MENU.