background image

KC4350GPC model shown. 
May not be exactly as shown.

Gasoline Powered Pressure Washer 
Owner's Manual

Customer Service Hotline:

1-866-939-6666

visit our website:

www.kodiakpower.ca

Overview & Warnings ........................................... 1
Safety Precautions ............................................ 2,3
Assembly Instructions .......................................... 4
Operating Instructions .......................................... 5
Using the Accessories .......................................... 6
Working with Detergent ........................................ 7
Shutdown Instructions .......................................... 8
Storage, Winterizing & Transport  .......................... 9
Basic Maintenance .......................................... 9,10
Troubleshooting ............................................. 11,12
Warranty Information .......................................... 13

IMPORTANT: 

Do not operate this equipment until you have read and understand all of the

enclosed Owner's Manuals. Carefully 

read all Warnings, Safety Precautions, Assembly

and Operating Instructions, Maintenance and Storage information.

 

MAN-KCG

Summary of Contents for CKC3200GPC
















Reviews: