16
English
Operation
General information on use for vacuuming
and sealing in vacuum bags
Fig.
1
Put the food or the items that you
want to preserve inside the vacuum
bag. Insert the opening of the bag into
the vacuum chamber. Make sure the
vacuum nozzle is not covered by the
bag.
Fig.
2
Close the lid. If necessary press down
the lid firmly so the latches at both
sides lock in place.
Warning
Do not to vacuum liquids. Liquids must not
enter the vacuum nozzle or the inner of the
product.
Vacuuming and sealing or sealing only
Fig.
3
Carry out the desired operation.
A) Vacuuming and sealing
•
Food
button
Setting Dry:
for dry foods and goods
Setting Moist:
for wet or moist foods
•
Speed
button
Normal:
to vacuum foods or goods
normally (relatively firm)
Gentle:
to vacuum sensitive, e.g. crumbly
foods or goods gently.
Push the
VAC/Seal
button to start the
vacuuming and sealing process. The
VAC/
Seal
indicator LED is on when the air is
vacuumed out of the bag. Afterwards
the sealing process of the bags starts
automatically indicated by the
Seal
indicator
LED. The vacuuming process can be stopped
at any time by pushing the
Stop
button.
B) Sealing only
Instead of pushing the
VAC/Seal
button
push the
Seal
button. Doing so the bag will
not be vacuumed but the bag will be sealed
only.
Fig.
4
Once the
Seal
indicator LED is off push
the release buttons at both sides, open
the lid and remove the sealed vacuum
bag.
Vacuuming in suitable food containers
Note:
For correct use of food containers,
e.g. connecting and disconnection to and
from the vacuum bag sealer or for opening
the vacuumed food container follow its
instructions for use and safety.
Fig.
5
Place the foods or goods in a food
container (not included) suitable for
vacuuming and close the lid.
Note:
Leave clearance of about 2.5 cm
between food and lid.
Fig.
6
Plug one end of the vacuum hose (not
included) onto the vacuum nozzle and
the other end plug into the hole or onto
the valve of the lid of food container.
Fig.
7
Push the
Canister
button – the lid of
vacuum bag sealer must be opened
for doing so. If the defined vacuum
is reached the vacuum process
stops automatically. You can also
stop the vacuum process earlier by
pushing again the
Canister
button. If
vacuuming process is finished firstly
remove the vacuum hose from lid of
food container and then from vacuum
nozzle.
IM_KVS3411M_161215_V02_HR.indb 16
15/12/16 9:51 AM
