$
:
Appropriate use
The
2-wheel tractor
(Type Frästalent) and the
original
attached devices
approved
by the manufacturer are designed exclusively for normal usage and work in agriculture and for-
estry, such as mowing grass and pastures. This could also include snow clearing, winter services
and sweeping.
Depending on the setting of the steering shaft, the
2-wheel tractor is designed for the fol-
lowing work:
Front attachment:
for mowing, rotary ploughing, chaff cutting, cleaning, snow hoeing, snow
clearing and transporting.
Rear attachment:
for hoeing, ploughing, grubbing and for single-axle trailers (brake required).
•
The conditions specified in the quotation and in ‘appropriate use’ are decisive. Any other
use is construed as being inappropriate. The manufacturer shall not be liable for any dam-
ages resulting from this; the user alone bears the risk.
•
This work is permitted only if the engine sizes, wheel sizes and environmental conditions
are suitable.
•
The
2-wheel tractor (type Frästaslent / Frästalent Spezial) may only be used, main-
tained and repaired by persons who are familiar with this work and who have been instruct-
ed about the hazards.
•
The
2-wheel tractor may not be used on steep slopes. There are conversion kits for
these special types of operation – twin wheels, iron slope wheels, gauge extensions etc.
•
Unauthorised conversions and alterations to the
2-wheel tractor are forbidden for
safety reasons!
•
Relevant regulations governing the prevention of accidents as well as the generally accept-
ed regulations governing health and safety at work and road traffic rules must be complied
with.
Information!
The operating, service and maintenance conditions for the
2-wheel tractor specified
in this operating manual are prerequisites for appropriate use and must be strictly adhered
to.
Warning!
If the machine is used for any other purpose than that stated above or is driven with a
higher power than is permitted, dangerous situations may arise for people and damage to
property can occur.
Warning!
The manufacturer is not aware of any inappropriate or prohibited uses of the machine.
The improper attachment of additional devices or the attachment of additional devices and
parts not purchased from the
company exclude liability for any resulting damage.
