Product Layout
Control Panel Layout
Function Instructions
•
Press the “
” button to start the unit. The LED display will show [
00
].
•
Heating function setting
: press the FUNCTION button once, and the LED display will
show [ P8 ] (as the default power setting is 1800W). The HEAT indicator will light up,
meaning the cooker is heating up. The power can be adjusted by pressing the “ ” or
“ ” buttons to alter to the following values:
P1 (400W) – P2 (600W) – P3 (800W) – P4
(1000W) – P5 (1200W) – P6 (1400W) – P7 (1600W)
or
P8
(1800W)
.
•
Warming function setting
: press the FUNCTION button again and the LED display will
show [
H6
] (as the default temperature is 240C). The WARM indicator will light up,
meaning the cooker is in the warming process. The temperature can be adjusted by
pressing the “ ” or “ ” buttons to alter to the following values:
H1 (60°C) – H2 (100°C)
– H3 (140°C) – H4 (180°C) – H5 (220°C)
or
H6 (240°C)
.
•
Timer function setting
: on the state of HEAT or WARM, press the TIME button once to
enter the time setting which is used to set the time for the power to shut off. The LED
display will show [
10
], as the default time is 10 minutes.
1) Press “ ” or “ ” within 5 seconds to set the timer. The maximum time you can
set is 99 minutes. The “ ” and “ ” buttons can be held down to scroll through
the numbers, or can be pressed and released to advance one number at a time.
Note:
If the time is not adjusted within 5 seconds, the timer setting function will be
finished.
2) Press the TIMER button to confirm the time. A confirmation tone will sound.
3) The unit will stop automatically when no button has been pressed within 2 hours.
Summary of Contents for 1800W Portable Induction Cooker
Page 1: ......
