Operation
1. Insert the power cord into an appropriate power socket, and a tone will sound. The LED
display will show [
- -
], indicating that the unit is powered.
2. Place a pan on the center of the hot plate.
3. Press the “ ” button once. The LED will display [
00
].
4. Press the FUNCTION button once, and the LED display will show the corresponding
setting. At the time that the fan starts running, the default power of the unit will be
P8
(1800W)
, which can be adjusted by pressing the “ ” and “ ” buttons.
5. If the pan is not placed correctly, the LED display will show [
E0
] and a warning tone will
sound at 3 second intervals. The appliance will return immediately back to the standby
mode, at which point you can readjust or reposition the pan location.
6. Press the FUNCTION button again to enter the WARM setting. The default temperature is
240°C (the LED displaying [
H6
]), which can be adjusted by pressing the “ ” or the “ ”
buttons, whereupon the temperature will start rising to the set temperature and will then sit
and maintain that warm temperature.
Note: you can reset the function by pressing the FUNCTION button at any time during
operation.
7. In the HEAT or WARM states, you can set the timer to shut-off the power by pressing the
TIME button.
- After setting the timer, the power and time displays will cycle. You can adjust the
power by pressing the “ ” or “ ” buttons.
NOTE: Under the timer shut-off state, the unit can be shut off by pressing the “ ”
button. After shut off, the pre-set timer shut-off timer will be forgotten.
8. When timed out, the unit will stop operating and the indicators will all go blank.
9. Once shut-off or the cooking program ends, the integrated cooling fan will continue running
for a further 60 seconds.
10. After cooking, remove the plug from the power outlet.
Cooking Utensil Selection
Useable pans
Steel or cast iron, enamelled iron, stainless steel, flat-bottom pans/pots with diameters greater than
18.5cm.
Summary of Contents for 1800W Portable Induction Cooker
Page 1: ......
