Charging battery pack (not included)
1.
Remove the battery pack (7) from the handle, pressing the push lock buttons (6)
downwards to do so.
2.
Check that your mains voltage is the same as that marked on the rating plate of
the battery charger. Plug the mains plug of the charger (8) into the mains socket
outlet; turn on the power the green LED will illuminate.
3.
Push the battery pack onto the battery charger. The green LED will extinguish, and
the red LED will illuminate, which indicates that the battery pack is being charged.
4.
When the charging period is completed after approx. 1 hour, the green LED will
illuminate, and the red LED will extinguish.
5.
The temperature of the battery pack may rise slightly during the charging
operation. This is normal. If the green LED extinguishes during charging, the
temperature is either above or below the optimal charging temperature. In this
case, pull the plug of the charger and charge the battery in an environment in
which the temperature is either warmer or colder.
If the battery pack fails to become charged, please check:
•
Whether there is the voltage at the socket-outlet
•
Whether there is proper contact at the charging contacts on the charger
If the battery continues to fail to charge, please contact the Kogan customer support team.
To ensure that the battery pack provides long service you should take care to recharge it as
soon as you notice that the power of the power tool drops.
Never fully discharge the battery pack. This will cause the battery pack to develop a defect.
