17
Setup
Page
Menu
Use of the “Time Setup” menu
1. Press the Menu button, and then press
or
until the “Setup” menu appears.
2. Press
or Enter button to enter the “Setup” menu.
3. Make sure “Time Setup” is highlighted, press
or
as required.
4. Press
or Enter button to enter the submenu.
5. Press
or
to choose “Time Zone”,
“Time” or “Sleep Timer”.
6. When finished, press the Menu button to exit the
OSD Menu, or press Exit to make another selection.
Time Setup Submenu
Selection of “Time Zone”
After entering the “Time Setup” submenu:
1. Make sure "Time Zone" is highlighted, press
or
as required.
2. Press
or
to select your timezone.
Australian Timezones are as follows:
- GMT+8:00 Perth
- GMT+9.30 Darwin and Adelaide
- GMT+10:00 Canberra, Melbourne, Sydney, Brisbane, Hobart
3. Press the Menu button to exit the OSD Menu, or
press Exit to make another selection.
”Time” Options
After entering the “Time Setup” submenu:
1. Press
or
to highlight “Time”.
2. Press
or Enter button to enter the “Time” submenu.
- When “Auto Synchronisation” is set to “Off”, Date and
Time information can be changed using the Number buttons.
- When “Timer” is set to “On”, the TV will turn On and Off from
Standby mode every day at the “Power On/Off Timer” times.
Use the Number button to edit these times.
Note: If the unit is unplugged, or main power is otherwise
disrupted, the memory for all Time settings will be lost.
