background image

 

Auxiliary Items: Do not use an inverter, adaptor or extension cord with this 

appliance. If the cord is too short, have a qualified electrician install an outlet near 

the appliance. Use of an extension cord and an inverter can negatively affect the 

performance of the unit. 

 

Protect from moisture: To protect against the risk of electric shock, do not immerse 

the unit, cord or plug in water or spray it with any other liquid. Do not connect or 

disconnect the electric plug when your hands are wet. Turn the power switch off 

before removing the plug from the socket. 

 

WARNING: Disconnect! To reduce the risk of fire, electric shock or personal injury, 

always unplug the appliance from the socket when not in use, when moving and 

before cleaning or servicing. Never unplug the unit by pulling the power cord. 

Always grip the plug firmly and pull straight out from the power point. 

 

Electrical work: Any electrical work required for the installation of this appliance 

should be carried out by a qualified electrician. 

Never use this appliance with a damaged refrigerant circuit! If the coolant circuit becomes 

damaged, avoid proximity to open fires and all types of heat sources. The room in which the 

appliance is located should be ventilated for a few minutes.  

 

Installation 

Heavy: This appliance is heavy, take care when moving it. To avoid back or other injuries, 

consider a two-person lift or mechanical aid when installing it. Failure to do so can result in 

back or other injury. 
Damage: When unpacking, check the appliance carefully for damage. If it is damaged, do 

not install the appliance. Contact the after-sales support centre on 1300 256 426 for advice 

on examination or return of the damaged appliance. 
Protect from moisture: Install the appliance in an indoor area protected from wind, rain, 

water spray or drips. 
Protect from heat: Do not install the appliance next to an oven, grill or other sources of high 

heat or where it will be exposed to direct sunlight for prolonged periods. 
WARNING: Ventilation: To ensure proper ventilation, keep any ventilation openings, in the 

appliance enclosure or the built-in structure, clear of obstructions. Ensure adequate air 

circulation around the appliance to prevent overheating. 
Level: Install the appliance level to ensure proper operation. 
 

Cleaning and Maintenance

 

Disconnect: Unplug the appliance before cleaning or servicing. Failure to do so can result in 

electric shock, injury or death. Do not connect or disconnect the plug when your hands are 

wet. 
Flames: Do not let open flames or ignition sources enter the appliance. 
Flammable/explosive substances: Never clean this appliance with flammable fluids. Do not 

store or use volatile, flammable or explosive propellants or liquids in or close to this or any 

other appliance. The fumes can create a fire hazard or explosion. 
Solvents: Do not use solvent-based cleaning agents or abrasives on the interior as these 

may damage or discolour the surfaces of the appliances. 

Summary of Contents for KA323BTMNTA

























Reviews: