Kogan KAACH12PORA, User Manual

7

8

OPERATING  INSTRUCTIONS

Press the ION button, the ion generator 
is ener gized and will help to remove 
pollen and impur ities from the air, and
 trap them in the filter. Press it again to 
stop the function.

8

ION button(optional)

Operating Instructions

-    Press the 

 "

MODE

"

 button until the 

 "

COOL

"

     indicator light comes on. 
-    Press the 

ADJUST buttons

 "

¡

"

 or 

"

"

 to 

     select your desired room temperature. The
     temperature can be set within a range of 

O

O

O

O

     17 C-30 C/62 F-88 F.  
-    Press the 

"

FAN SPEED

"

 button to choose the 

     fan speed. 

¡ 

-    Press the 

 "

MODE

"

 button until the 

 "

DRY

"

 indicator 

     light comes on.     
-    Under this mode, you cannot select a fan speed or 
     adjust the temperature. The fan motor operates at 
     LOW speed.
-    Keep windows and doors closed for the best 
     dehumidifying effect.
-    Do not put the duct to window.
     
     

COOL operation

DRY  operation

-    Press the 

 "

MODE

"

 button until the

"

FAN 

"

 indicator  light comes on. 

-    Press the 

"

FAN SPEED

"

 button to 

     choose the fan speed. The temperature
     cannot be adjusted.
-    Do not put the duct to window.

FAN operation

TIMER operation

-    Press the 

 "

MODE

"

 button until the 

 "

HEAT" 

     indicator light comes on. 
-    Press the 

ADJUST buttons

 "

¡

"

 or 

"

"

 to 

     select your desired room temperature. The
     temperature can be set within a range of 

O

O

O

O

     17 C-30 C/62 F-88 F.  
-    Press the 

"

FAN SPEED

"

 button to choose the 

     fan speed. For some models, the fan speed 
     can not be adjusted under HEAT mode.

¡ 

HEAT  operation

(cooling only models without)

AUTO  operation

-    When you set the air conditioner in AUTO 
     mode, it will automatically select cooling, 
     heating(cooling only models without), or fan 
    only operation depending on what temperature 
     you have selected and the room temperature.

-    When the unit is on, first  press the 
      Timer button, the TIMER OFF 
      indicator light illuminates. It indi-
      cates the Auto Stop program is 
      initiated. 
 -    When the unit is off, first  press the 
      Timer button, the TIMER ON indic-
      ator light illuminates. It indicates 
      the Auto Start program is initiated. 
 -    Press or hold the UP or DOWN 
      button to change the Auto time by 
      0.5 hour increments, up to 10 hours, 
      then at 1 hour increments up to 24
      hours. The control  will count down 
      the time remaining until start. 
 -    The selected time will register in 5 
      second and the system will autom-
      atically revert back to display the 
      previous temperature setting.
 -   Turning the unit ON or OFF at any 
      time or adjusting the timer setting 
      to 0.0 will cancel the Auto Start/
      Stop timed program.
 -    When the malfunction (E1,E2or E4)
      occurs, the Auto Start/Stop timed
      program will also be cancelled.

SLEEP operation

-    The air conditioner will control room 
      temperature automatically round the 
      temperature point set by you.
-    Under AUTO mode, you can not 
     select the fan speed.

When the operation is ON, press the 
SWING button can stop the louver at
the desired angle. The louver swing up

O

to an angle of 6  for each press. Keep 
pressing the button more than 2 seconds 
can initiate the auto swing feature.

9

SWING button

(Applicable to the models with auto swing feature only)

Press this button, the selected temperature 
will increase(cooling) or decrease(heating) 

O

O

by 1

C/2 F 30 minutes.The temperature 

will then increase(cooling) or decrease

O

O

(heating) by another 1

C/2 F after an 

additional 30 minutes. This new temper-
ature will be maintained for 7 hours 
before it returns to the originally selected 
temperature. This ends the Sleep mode 
and the unit will continue to operate as 
originally programmed. 

NOTE: 

This feature is unavailabe under 

FAN or DRY mode.

OPERATING  INSTRUCTIONS

Other features

In the case of a power outage or interruption, 
the unit will auto matically re-start, in the 
settings ast used, after the power is  restored.

Power Outage

After the unit has stopped, it can not be restarted
operation in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes. 

Wait 3 minutes before resuming operation

The louver can be adjusted manually or 
automatically according to the different models.

Adjust the air flow direction manually

  (Fig.5):

   The louver can be set to the desired position
    manually. The max setting angle is about

O

    60 , please do not force to set any larger. 
    Do not place any heavy objects or other loads
    on the louver, doing so will cause damage to
    the unit.
    

Ensure the louver is fully opened under 

    heating operation.
    Keep the louver fully opened during 
    operation.

Adjust the air flow direction automatically

    (Fig.6):

    When operation is ON, the louver opens fully.
    Use the SWING button on the remote 
    controller can stop the louver at the desired
    angle.

O

    The louver move up to an angle of 6  for 
    each press until it move to a position which
    would affect the cooling or heating effect 
    of the air conditioner, it would automatically 
    change the swing direction.
    If keep pressing the SWING button more 
    than 2 seconds, the auto swing feature is 
    activated. The louver swings as shown in 
    Fig.6
     

Air flow direction adjustment

Fig.5

Adjust manually

Swing automatically

Fig.6