19
LOCATING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob. Fix the hob on the work surface by screw four brackets
on the bottom of hob (see picture) after installation.
Adjust the bracket position to suit for different work surface’s thickness.
CAUTION
1.
The ceramic cooker hob must be installed by a suitably qualified person. Please do not install this
appliance by yourself.
2.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary
dryers.
3.
The wall and surrounding areas affected by heat above the work surface shall withstand heat.
4.
To avoid any damage, all cabinetry, work surfaces and adhesives must be resistant to heat.
5.
A steam cleaner is not to be used.
6.
This ceramic hob can be connected only to a supply with system impedance no more than 0.427
ohm. In case necessary, please consult your supply authority for system impedance information
.
CONNECTING THE HOB TO THE MAINS POWER SUPPLY
The power supply should be connected in compliance with the relevant standard, or a single-pole
circuit breaker. The method of connection is shown below.
Summary of Contents for KACRMICCTPA
