18
3.6 Manual Tune
1. Press
MENU
turn
SELECT
to <
Manual tune
>, press
SELECT
to confirm.
2. Turn
SELECT
to step between the channels and press
SELECT
to select the current channel.
Note
: If there is a multiplex corresponding to this channel
and frequency, then the display will show a tuning meter
with the signal strength and the multiplex name after a few
seconds.
3. Press
SELECT
again to exit this order.
3.7 DRC (Dynamic Range Control) Value
You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.
Note:
a. Setting DRC to
off
indicates no compression.
b. Setting DRC to
low
indicates little compression.
c. Setting DRC to
high
shows maximum compression.
1. Press
MENU
turn
SELECT
to <
DRC
>, press
SELECT
to confirm.
2. Turn
SELECT
to your
preferred
option, then press
SELECT
to confirm.
3.8 To change station order
1. The path is: press
MENU
<
Station order
>, press
SELECT
to confirm.
Note
: There are 3 options: Alphanumeric, Ensemble and Valid. ‘
#
’
shows before the default of your setting option to indicate
current station order.
STATION ORDER
DESCRIPTION
Alphanumeric
Display all stations in alphanumeric order.
Ensemble
List the current broadcasting stations before inactive stations.
Valid
Remove inactive stations from the station list.
2. Turn
SELECT
to your
preferred
option, press
SELECT
to confirm.
