Charging
1.
Before initial use, charge for 4 hours to fully charge the battery.
2.
Connect the supplied adapter to the charging port and plug the adapter into a
100~240V power outlet.
3.
The LED light on the device flashes regularly, showing the battery level, indicating
that it is charging.
Battery Indicator Status
Battery Level
First indicator is on
20-35%
Second indicator is on
40-60%
Third indicator is on
65-80%
Forth indicator is on
85-100%
4.
The battery can be charged at any time and at any power level. This product
cannot be operated while charging.
5.
When the battery is to less than 5%, the first indicator will flash. Cease use and
charge the massager.
6.
The average running time of the product when it is fully charged is approximately 3
hours. This may be affected by the gear level used and the pressure applied.
Using the Massage Gun
1.
Press the power button to turn on the massage gun. The gun will automatically
start on the lowest speed.
2.
Press the “+” or “-” button to adjust the speed level. Each time you press the “+”
button, the gear will increase by 1 until it reaches 10.
3.
Intelligent protection: after 10 minutes of continuous use, the device will need to be
restarted before it can be used.
OPERATION
