11
•
Ensure that the electrical connections comply with the installation instructions.
•
Remove the polystyrenes block and any material from the drum.
•
Before using your tumble dryer for the first time, it recommends that you place a few
damp cloths inside the appliance and dry for 30 minutes. There may be dust inside a
brand-new tumble dryer.
Caution! Remove transport safety packaging foam
Before use the machine, the packaging foam pieces must be removed from the drum.
1.
Open the loading door.
2.
Pull off adhesive strips from inside machine on top of drum.
3.
Remove the packaging foam pieces (x2) from the machine.
Check across the corner
When press on the edge, the machine should not shake up
and down. (please check two direction) when press on the
top frame (across the corner), the dryer shakes, need to re-
adjust the adjustable feet.
Do not put stacks of blanket or a rope on the floor, which
could generate some heat and affect the machine running.
BEFORE FIRST USE
Packaging foam
(x2)
Important:
The hot air emitted by the tumble dryer can reach temperature of up to
60°C. The appliance must therefore not be installed on floors which are not resistant to
high temperatures.
