Level adjustment
The machine must stand perfectly level on all four feet to ensure safe and proper operation.
Incorrect installation may increase electricity and water consumption and may cause the
machine to move during usage.
The level can be adjusted using the Adjustment feet on the bottom of the machine
•
Using the spanner rotate the locknut in a clockwise direction. Then rotate the
locknuts together with adjustable feet to raise or lower.
•
Use a spirit level to check the machine is level.
•
Hold adjustable feet securely with a pipe wrench. Turn locknut again using the
spanner until it sits firmly up against the housing.
Note:
Vibration and noise may occur if the locknuts do not sit firmly up against the houses.
Locknuts
Raise
Lower
Loose
Locked
Adjustable Feet
Summary of Contents for KAGFLWAS10A
Page 1: ...10KG FRONT LOAD INVERTER WASHING MACHINE KAGFLWAS10A...
Page 2: ......
Page 31: ...NOTES...