background image

Switching front-facing and rear-facing lens 

 

Press the Front/Rear lens switch button 

 to switch the active lens. 

 

Press Playback button   to review photos taken with the rear-facing lens. 

 

Recording video 

 

Press Photo/Video switch button   to enter Video mode. 

 

Press Front/Rear lens switch button 

 to switch the active lens. 

 

Press Shutter button 

 to begin recording. Press Shutter button again to save the 

video and stop recording. 

 

Press Playback button   to view recorded videos. Press the Shutter button 

 

to play the video in the Playback menu. 

 

Filters 

Press the Up/Down buttons to cycle through different filter options. Filters overlay a fun 

scene or border to your image, with different options available between front and rear 

cameras. To quickly return to default (no filter) option, press the Front/Rear Lens switch 

button twice, to swap quickly back to the current lens with no filter. 
Note that while the full colour of the scenes/filters will be saved to the SD card (and 

exportable to other devices in this format), the printer will only print black and white.  

 
Delete 

 

Press Playback button   to enter playback menu. Press Up/Down buttons to 

select saved images or videos. 

 

Press Settings button 

 to bring up the Delete option. Use the Up/Down 

buttons to select ‘OK’ or ‘Cancel’. 

 

Press OK button   while ‘OK’ is selected to delete the selected image or video. 

 
Reset 

If the camera becomes non-responsive or shows difficulty operating, the Reset switch acts 

as a manual override to turn the power completely off and then back on. Slide the Reset 

switch to ‘OFF’, then slide back to ‘ON’ before pressing the power button to turn the camera 

back on. If the switch is left set to ‘OFF’, it will not turn on. 

 

 

Summary of Contents for KAKIDINCMPA

















Reviews: