VCR Connection
These instructions are assuming you have already connected your TV to an
antenna or other cable TV system. Skip step 1 if you have not yet connected an
antenna.
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR
tape. Each VCR has a different back panel configuration. When connecting a
VCR, match the colour of the connection terminal to the cable.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the
VCR.
3. Connect an RF cable between the ANT OUT terminal on the VCR and the
ANT IN terminal on the TV.
4. Connect a component cable between the COMPONENT (Y, Pb, Pr) jacks
on the VCR player and the YPbPr jack on the TV.
5. Connect the audio cables between the AUDIO OUT jacks on the VCR and
the AUDIO R and AUDIO L jacks on the TV.
Note:
•
Whenever you connect an external device to your TV, make sure that the
power on the unit is turned off.
•
When connecting an external device, match the colour of the connection
terminals to the cable.
11