Equalizer
1. Press / key to select an equalizer item.
▲ ▼
2. Press OK key to enter the equalizer submenu. The
sound settings can be adjusted to suit your user
preferences.
1. Press / key to select a particular item.
▲ ▼
2. Press / key to decrease or increase the value
◀ ▶
of a particular item.
Note: The adjusted values are stored according to the selected particular item.
Balance
If the volumes of the left speaker and the right speaker are not the same, you
can adjust the "Balance" to suit your personal preference.
1. Press / key to select "Balance" option.
▲ ▼
2. Press / key to decrease or increase the value of the item.
◀ ▶
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to
adjust the volume every time the channel is changed. “Auto Volume”
automatically adjusts the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when
the modulation signal is low.
1. Press / key to select “Auto Volume" option.
▲ ▼
2. Press / key to select “On” or “Off”.
◀ ▶
Surround Sound
This is used to turn on surround sound to gain better sound effect.
1. Press / key to select "Surround sound" option.
▲ ▼
2. Press / key to select “On” or “Off”.
◀ ▶
SPDIF Mode
This is used to select "SPDIF Mode". This option is only used in HDMI\DTV
mode.
1. Press / key to select "SPDIF Mode" option.
▲ ▼
2. Press / key to select "RAW" or "PCM".
◀ ▶
HDMI Sound
This option is only used in HDMI mode.
1. Press / key to select “HDMI Sound" option.
▲ ▼
2. Press / key to select HDMI Sound mode, HDMI or VGA.
◀ ▶
20
