Kogan kaled55 series, User Manual

INSTALLATION

WALL MOUNTING INSTALLATION GUIDELINES

For wall mounting with an optional bracket, please read the following instructions in conjunction with the 
bracket's instructions. Make sure qualified service personnel perform the operation. 

This television can be wall mounted as follows:

          1. Place the LED Television face down onto a solid surface. Please place some soft c l o t h material 
          over the front of the screen to help protect it  from any damage. The L

E

D panel is a fragile component, 

          and must be suitably protected when removing the base stand. Be sure that no hard or sharp objects can 
          come into contact with the screen's surface. Do not exert pressure on the front of the unit at any time, as 
          this may damage the L

E

D screen.  

          2. Remove the 4 long screws from the lower part of the television, where the neck bracket joins to the 
          TV’s body, and take away the stand (put the stand and screws somewhere safe for future use).                      

          3. Use the four M6 screws provided with your TV to fix it onto your wall mounting bracket  (not included) 
          via the four VESA  standard holes on the back of the television.

ANTENNA

Note:
Aerial connections: IEC (PAL-type, female).
Input impedance: 75    unbalanced.

Plug  (not  supplied)

Outdoor antenna (not supplied)

For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended. 

POWER

AC Input

100-240V~ 50/60Hz  128W

N.B.  Unwind the mains power cord
to its full length prior to initial use, 
and locate it away from other cables 
that will be connected to the TV

-7-

400mm x 200mm VESA
wall mounting hole spacing 
and locations

200mm

400mm