IMPORTANT SAFEGUARDS
When using electrical appliance, basic safety precautions should always be followed,
including the following:
1. Read all instructions before using the slicer.
2. Close supervision is necessary when any appliance is used near children.
3. Switch off and unplug the appliance when not in use, before putting on or taking off
parts, and before cleaning. Switch off appliance and allow it to come to a complete
stop before approaching parts which move while in use.
4. Avoid contacting moving parts. Never feed food into the slicer by hand. Always use
the completely assembled slicer with sliding feed table and piece holder. The
appliance must be used with the sliding feed table and the piece holder in position.
5. To protect against any risk of electrical shock, do not put power unit in water or other
liquid.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact the Kogan customer
support team for information on how to have the unit repaired or replaced.
7. The use of attachments not recommended or sold by Kogan may cause fire, electric
shock or injury.
8. Do not use the appliance outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface.
10. The slicing blade is VERY sharp. Hold only by blade lock. Handle carefully when
cleaning.
11. Do not use the appliance for anything other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from the bottom of slicer, and slide into the slot. Position slicer on a
clean, dry and smooth surface.
2. Move the sliding feed table back and forth a few time to make sure movement is
smooth.
3. Place the piece holder on back of the sliding feed table.
4.
Select the required slice thickness by turning thickness adjusting knob, clockwise for
thinner slice and counter-clockwise for thicker slice. The range of thickness adjusting
is from 0 to 15mm.
2
Summary of Contents for KAMEATSLICA
Page 1: ......
