Set up
1.
Place the device on a flat surface.
2.
R
emove the plastic film from the filter.
3. Open the water tank door and fill with water. Do not overfill.
4. Plug the USB power adaptor into a compatible outlet, connecting this to the power port
on the back of the device. The USB can plug into a wall outlet or computer port for
charging.
"FAN" Button
SLEEP Button
LED Indicator Light
"LIGHT" Button
ON/OFF Button
Back Grill
Water Tank
Power Port
Tips for use:
•
Place the device on a raised surface such as a desk or counter top. This will allow your
personal area to be cooled much faster.
•
The the filter absorb water for at least 3 minutes after filling the tank and before use. This
will allow the device to cool air quicker.
•
The coolest area will be directly in front of the device. Please try to position the device so
that you are in this area.
•
The device will run for approximately 8 hours on a single fill on low fan speed.
•
Keep the water tank filled with water to allow continuous cooling.
0
Even when the water tank is empty, the device will continue cooling as the filter may
still be soaked with water.
•
If the device is not to be used for some time, during winter for instance, please empty the
water tank and power the device on high for 4 hours. This will dry out the filter and
interior of the device.
2
