Blender Jar
Standard processing time is 1 minute.
1.
Prepare the ingredients and put them in the blender jar (12), then mount the blender
cover (13) securely.
2. Position the blender jar (12) on the motor base; then turn clockwise to make it firmly
fixed. Ensure that the speed switch should be in set to “0” speed, then plug the unit in
and use the pulse setting 2-3 times as pre-blending. Then choose “1” or “7” speed for
processing. During operation, you can open the small lid on the blender cover (13) and
add water or any other ingredients required through the feeding chute.
3. DO NOT open the blender cover (13) for adding ingredients during operation!
Always add in some water when using the blender for ice crushing.
Troubleshooting
Problem
Solution
Machine doesn’t work.
•
Ensure unit is correctly
assembled.
•
Make sure power plug is
plugged in properly.
•
Check if the safety switch
has tripped, or if there is a
power outage.
Machine stops running
suddenly.
•
Processing bowl may have
been shaken loose during
vigorous processing.
Please re-install the bowl
cover.
Motor is running, while
components do not run.
•
Make sure the driving
shaft is installed correctly.
Maintenance
1.
Please unplug the power cord to protect yourself from electric shock while cleaning the
machine. Do not immerse motor base and power cord in water.
2. All removable accessories can be cleaned in water except the motor base. Dry the wet
parts after cleaning.
3. For easy cleaning of the blender jar, you can put in some warm water and detergent and
let it run for a short period of time.
4. Always store the machine in dry, cool place.
5. DO NOT use hard (solid) detergents or cleaners to avoid scratches on the product.
6. DO NOT operate the appliance for more than 1 minute at a time.
