background image

Control Panel

Functions Setting

This portable air conditioner has three functions: cooling, dehumidifying and fan. The 
fan has two speeds: high speed and low speed. You can set the temperatures between 
17°C ~ 30°C and set a 24 hour timer.

Buttons

There are six keys on the control panel: POWER, Mode, Fan Speed, Timer, UP and Down

1.

Power Button

Press to turn air-conditioner ON or OFF.

2.

Mode Key

Set the cooling, dehumidifying and fan modes when unit is working or during the 
timer-on sequence.

3.

Fan Speed

Press to select between high and low air speeds.

4.

Timer

When the unit is operating, you can press this to set a time for the unit to turn 
itself off. Once the time set has passed, the unit will automatically shut down. If 
this button is used while the unit is not operating, it serves as a timer that will 
count-down until the unit turns itself on automatically.
Once a timer has been set, the Timer indicator light will be on.

5.

Up/Down Button

Press this two key set to set the desired room temperature (each press up or 
down will shift the setting by 1°C), and it can also be used to set the timer in 
Timer mode.  If you wish to switch between °F and °C measurements, press both 
the UP and DOWN buttons together.

4

Celsius 

Indicator

Regular Time

Indicator

Display

Window

Fahrenheit

Indicator

Timer

Button

Mode

Button

Up

Button

Down

Button

Fan

Button

ON/OFF

Button

Summary of Contents for KAPORAIR10GA













Reviews: