Preparation for Water Supply and Test for Operation
1.
Insert the power plug into the electrical socket.
2.
When the indicator light is on, water starts to flow into the inner water tank. The
process will take approximately 11 seconds. Water then sprays out from the nozzle.
All indicator lights will then turn off with a sound.
3.
Press the power button on the toilet or on remote control, then the power indicator
light or power icon on the LED display will turn on.
4.
Adjust the temperature of water and toilet seat to an appropriate level.
5.
Follow the instructions to operate, press buttons as instructed and test every
operation.
6.
The toilet seat will only function when the seating sensor on the seat ring detects
that there is a person seated (you will hear a beep sound when seated).
Preparation
1.
Ensure the plug is inserted into the power socket
then press the reset button on the residual current
device (RCD). The indicator turns from black to slightly
red.
2.
Open the water inlet valve
OPERATION
Summary of Contents for KAPWDBIDETA
Page 1: ...SMART WASH DRY ELECTRIC BIDETTOILET SEAT KAPWDBIDETA...
Page 2: ......
Page 7: ...DIMENSIONS...
Page 27: ...NOTES...
