7
Installation
INSTALLATION KIT
The installation kit contains the following parts:
PART ID
DESCRIPTION
ILLUSTRATION
QTY
1
Rangehood
1
2
Rear-underside support mounting
bracket
1
3
Screws (ST4x 30mm)
6
4
Screws (ST4 x 8mm)
2
5
Wall Plugs (8mm)
6
6
Flat Washers
6
7
Front Vent Cover
—If external ducting selected
1
8
Flu Outlet Adapter
1
UNPACKING
•
This product has been packaged to protect it against transportation damage. Unpack the
appliance and keep the original packaging and materials in a safe place. This will help to prevent
any damage if the product needs to be transported in the future. In the event that the carton is to
be disposed of, please recycle all packaging where possible.
•
Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach, and dispose of them safely.
IMPORTANT INSTALLATION ADVICE
WARNING!
—
All electrical work associated with the installation of this rangehood must be carried out by a licensed
electrician.
This rangehood must be correctly installed by a suitably qualified person in strict accordance with all
applicable rules and regulations and following the instructions in this manual.
Do not try to install the rangehood yourself; doing so will expose you to danger and void the warranty.
Improper installation, adjustment, alteration or service can cause injury or damage. We decline any
responsibility for in jury or damage, to persons or property, as a result of improper installation.
Fig.4
