Operation
Buzz notification
• The kettle will buzz twice when turning on and when it reaches the set
temperature.
• The kettle will buzz once to confirm a button press.
Pre-set temperature indicator light:
Temperature indicator lights: 50°C, 70°C, 80°C, 90°C. 100°C = all indicators off.
In normal mode: Corresponding indicators are lit; others turn off
In keep warm mode: Corresponding indicators flash; others turn off
Button operation
1) Start button: Press to start heating; press again to stop
• Press for 3 seconds to enter keep warm mode; press for 1 second to exit.
2) Temperature Pre-set:
In normal mode, the temperature indicator lights light to the set temperature.
In keep warm mode, the temperatures able to be set are: 50°C > 70°C > 80°C >
90°C > 50°C. In keep warm, buttons other than start will not function.
Kettle body LEDs
• The kettle body LEDs shine green for 50°C, blue for 70°C, purple for 80°C,
orange for 90°C and red for 100°C.
• The LED turns on while setting, heating or keeping warm at the set
temperature. When finished heating, the LED will turn off.
Normal mode
• When powered on, the kettle will buzz twice, the indicator lights will all light up
for 1 second and the LEDs on the kettle body will flash before going into
standby.
• When powered on, the default pre-set temperature is 100°C. Press start button
to boiling directly.
• When the water temperature reaches 98°C, the kettle will stop heating after 8-
10 seconds, buzz twice and enter standby.
• If a temperature is set but the start button is not, the corresponding indicator
light will turn off after 15 seconds, and kettle will go into standby.
• When the kettle reaches the set temperature, the indicator light will turn on.
When the kettle stops heating, it will buzz twice, the LEDs on kettle body turn
off while the indicator lights are lit. It will go into standby after a minute.
2
Summary of Contents for KASMTGLSKTA
Page 1: ......
