Before Use
Choose a safe location and avoid placing the unit in direct sunlight or near any
heat sources.
Avoid environments subject to vibrations, excessive dust, cold or moisture.
Due to the risk of electric shock, do not open the casing. Should a foreign object
accidentally find its way into the interior of the unit, contact the Kogan customer
support team.
Do not attempt to clean the unit with chemical solvents as this may damage the
finish. A clean, dry cloth is recommended for cleaning.
Keep a copy of this manual handy for future reference.
Product Layout
Top View
Side View
1.
Tone Arm Rest
: this rest is used to hold the tone arm while you are loading
your record.
2.
RPM
: 45 RPM adaptor
3.
Arm Clip
: This specially designed arm clip secures the tone arm when not
in use, at an upright position. When the unit is in use, fold this tone arm
down so as to not block your record.
4.
Tone Arm
: The turn table comes with a ready to use, pre-balanced tone
arm and cartridge. The tone arm is raised and lowered by hand. Please note
that the tone arm needs to be moved away from its resting position on the
arm clip for the turntable motor to start.
5.
Cartridge Protector
: Please remove the plastic cartridge protector before
placing the cartridge on a record by sliding it forward, off the cartridge.
6.
Rubber Mat
: Protects your record while playing.
7.
RCA Output
: Use to connect to external speakers (not included).
8.
USB Jack
: For charging and connecting to PC or Mac for recording and
editing via USB cable.
9.
33/45
: Alternate play speeds between 33/45 RPM.
Listening to a Record
1. Lower the ARM CLIP so you can place a record down.
2. Place a record on the turntable and set the player speed to match the
record speed.
Note
: when playing a single (a 45 rpm record) and/or records with large
center holes, use the 45 rpm adapter.
3. Remove the needle arm from its rest and gently move it to the desired
2
Summary of Contents for KAUSBTNTBLA
Page 1: ......
