True Wireless Stereo (TWS) using two speakers
You can connect to two XP8 speakers simultaneously for a stronger stereo and surround
sound effect.
1.
Ensure Bluetooth is turned off on your connecting device.
2.
Place the speakers side by side and power them both on.
3.
Press and hold the mode switching button down on either one of the speakers for 2
seconds. A sound prompt will play to confirm both speakers are preparing to enter
TWS pairing mode.
4.
Wait for the LED status indicator on the left channel speaker flashes, and the LED
status indicator on the right channel speaker turns a solid blue. Once this happens,
the TWS connection is successful.
5.
Switch on the Bluetooth on your device. Ensure your device is set to be visible to all
nearby Bluetooth devices.
6.
Search for "KAXP8SPKBKA" on your device and tap to connect. If you are unable
to find the speaker, try refreshing the list of available devices on your device. The
LED status indicators on both speakers will turn a solid blue if the connection is
successful.
7.
To disconnect, press and hold the mode switching button down for 2 seconds.
If previously connected, the two speakers can automatically re-connect to each other with
TWS for future use. If you do not wish for both speakers to automatically re-connect, press
and hold the mode switching button down for 5 seconds. This will reset and restart the
speaker.
Notes:
•
The speakers must enter TWS pairing mode prior to connecting to any
Bluetooth device. The TWS function will not work otherwise.
•
When using the TWS connection between speakers, only the left channel
speaker will have the function of the calling controls.
