3
Internet Radio Quick start Guide
What you need before you can use your Internet Radio
LAN Setting:
Spare Ethernet port on your modem router (an ADSL or Cable broadband internet connection is
highly recommended).
Wireless LAN Setting:
A wireless access point (Wi-Fi) connected to your broadband Internet connection.
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
If your wireless network is configured for trusted devices
you will need to enter the Radio‟s MAC
address into your wireless access point
‟s configuration settings. To find the Radio‟s MAC address
use menu items as follows:
Main menu
System settings
Network
View settings
MAC Address
To enter the MAC address into your wireless access point, you must read the instructions
supplied with the wireless access point.
Before you continue, make sure that your wireless access point is powered up and connected to your
broadband internet connection, or your LAN cable is connected.