About your LED LCD TV
EN-9 Digital LED LCD Television Instruction Manual
CONNECTING YOUR
TV
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
Read your computer user guide and check it has a
A
VGA connector.
Turn the power off on your TV and PC.
B
Connect a D type 15-pin VGA interface cable to the
C
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Turn on the power of the TV firstly and then the PC.
D
Press the button on the TV or TV remote control to
E
set the video input mode to VGA.
Once the image shows, if there is noise present,
F
change the VGA mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
CONNECT A DVD PLAYER TO YOUR
TV
Connect the DVD video outputs (Y, P
b
, P
r
) with the
supplied component adapter and component audio
adapter to the COMPONENT (Y, P
b
, P
r
) IN socket on your
TV.
Turn on the DVD player and insert a DVD.
A
Press the source buttom on the remote control to
B
select the source of COMPONENT in your TV .
Refer to the DVD player user guide for operating
C
instructions.
DVD
SCART INPUT
Connect the scart lead from the external device
A
(DVD player, Set-top box or games console) with the
supplied SCART adapter to the TV scart socket.
Press the
B
SOURCE
button to select SCART mode.
Press the
C
PLAY
button on the external device.
HDMI INPUT
Connect the cable from the HDMI device to the TV
A
HDMI socket.
Press the
B
SOURCE
button to select HDMI mode.
Refer to the HDMI device user guide for how to
C
operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
Summary of Contents for KGNFHDLEDH40VA
Page 1: ...KGNFHDLEDH40VA USER MANUAL...
