7
2.3 Buttons Function
2.3.1 [
] BUTTON
Press the [ ] button should be turn on the system,
into
power-saving mode.
I
n the
power
saving mode, pressing the [
] button
for
3 sec.
will start the
parameter setting mode. When
setting
parameters
is
finish
ed
, press
ing
the
[
] button
will send the unit back to
stand-by mode.
Press
ing
the [
] button
in stand-by mode
should be turn off the system
.
At the pre-work mode, pressing the [ ] button to
go back.
At the treatment mode, pressing the [ ] button to stop
treatment
.
2.3.2 [ P ] BUTTON
In stand-by and parameter setting mode, you can press the [P] button to select current treatment
mode from TENS/SPORT/MASSAGE.
I
n this mode, press
ing
the [P] button
will
switch the
program of user mode.
In treatment mode, press
ing
the [P] button
will
pause the
current
treatment, and press
ing
the [P} b
utton again can be continue the treatment.
2.3.3 [ E ] BUTTON
In
stand-by mode, press
ing
the [ E ] button
will go
into pre-work mode.
In
this state when
SPORT or MASSAGE mode
are selected
, press
ing
the [ E ] button can be switch the treatment
to suit different body p
art
s
.
In
parameter setting mode, press
ing
the [ E ] button
will
switch the different setting parameters.
2.3.4 [ A+ ] and [ B+ ] BUTTON
In
pre-work mode, pres
sing
the [ A+ ] or [ B+ ] button
will
start treat
ment
and increase the
treatment intensity.
At the parameter setting mode, press
ing
the [ A+ ] or [ B+ ] button to increase the value of
parameters.
2.3.5 [ A- ] and [ B- ] BUTTON
In
treatment mode, pres
s
the [ A- ] or [ B-] button to decrease the treatment intensity.
In
parameter setting mode, press the [ A- ] or [ B- ] button to decrease the value of
parameters.
For safety and prevention of accidental increases of output to this device, the button will be
locked automatically if there is no operation in the panel for 15 seconds. You can press the both
side of [ A- ] or [ B- ] buttons simultaneously
to
“
UNLOCK
”
the device.
