Connection
1.
Press and hold the multifunction button for 2 seconds until the headphones power
on; they will enter pairing mode automatically after 10 seconds. The LED indicator
flashes blue and red alternately. The headphones will power off after 5 minutes if
no Bluetooth device is connected.
2.
Activate Bluetooth on the audio device and set it to search for new devices.
iPhone Settings > Bluetooth > On
Android Settings > Bluetooth: On > Scan for devices
3.
Select “M6” If necessary, enter four zeros (0000) for the passcode and accept the
connection. Once successfully paired, the headphone LED indicator flashes blue.
Dual device connection
The headphones can be paired with two devices simultaneously. After connecting the first
audio device, turn off the headphones and Bluetooth on the device. Restart the
headphones and pair with the second device and maintain the connection. Finally, open
Bluetooth on Phone A and select “M6” in the menu.
Wired connection
Use the included audio cable to connect. Bluetooth turns off automatically and microphone
and battery functions are disabled when using a wired connection
INSTRUCTIONS
Note:
Menus may vary by device
Note:
The headphones can only play music from one device, even if two devices are
successfully connected at the same time.
