Using the Trap
•
Place the power switch in the ‘On’ position. The switch indicator will flash GREEN
and RED once.
•
Every 10 seconds the indicator will flash RED, signalling that the trap is set.
•
When a rodent enters the device, the indicator will turn solid RED, and the trap will
emit a high-voltage shock (5000V-7000V).
•
Once the rodent has been exterminated, the indicator will turn from solid RED to
flashing GREEN.
•
To dispose of the rodent, first ensure the trap is turn off then remove the top cover
and tip the rodent into a garbage bin.
False Triggering
In some cases, the trap will indicate that it has exterminated a rodent but upon checking
there will be nothing inside. This is completely normal and is caused by rodents triggering
the alarm then escaping. If this occurs, the trap will need to be turned off and the bait
replaced, if necessary.
WARNING:
Do not touch or handle unless the indicator is
flashing GREEN or the device is turned off.
Summary of Contents for Pestill PSELECRTZPA
