6.
Data distribution can be set to upload automatically. Tap Set Up, then tap the
Distribute Automatically icon to turn it on. Now when you open the app, any
changes in measurements will be automatically uploaded to your user profile.
Taking Measurements
1.
Set the measuring unit either by pressing the Unit button or selecting from the app.
2.
Place the scale on a flat, hard surface. A firm floor covering is required for correct
measurement.
3.
Step on to the scale with bare feet. Ensure that you are standing still with equal
weight distribution.
4.
Place your feet firmly on the electrodes to take measurements.
5.
The weighing begins immediately. The scale will display the weight value first.
While the further parameters are being measured, the “
” message
appears.
•
If a user profile has been created in the app, the BMI, body fat, water, muscle
percentage, bone mass and BMR are shown in the profile. The “Er” message
appears on the scale’s display unit.
The following details appears in the app:
o
Weight in kg
o
BMI in number
o
Body fat in %
Notes:
•
Ensure there is no skin contact between your feet, calves, or
thighs. Otherwise you may not see accurate measurement.
•
Remove your socks before stepping onto the scale for accurate
measurement.
