32
Issue
Reason/solution
The temperature sensor
and compressor are not
working.
•
The temperature is either less than 5°C or more than 35°C.
•
Ensure the ambient temperature is between 5–35°C.
The display is showing
‘E1’.
•
The coil temperature sensor or associated circuit may be
faulty.
•
Turn the appliance off and restart.
The display is slowly
flashing ‘L3’.
•
The appliance is in an area with an ambient temperature
≥42°C for one minute or longer.
•
Place the appliance in an area between 5–35°C. Turn the
appliance off and restart.
The display is slowly
flashing ‘L4’.
•
The appliance is in an area with an ambient temperature
≤0°C for one minute or longer.
•
Place the appliance in an area between 5–35°C. Turn the
appliance off and restart.
The display is showing
‘C8’.
•
The appliance has shut down and pressing buttons do not
lead to a response.
•
Turn the appliance off and restart. If ‘C8’ still appears after
turning on, or the appliance can’t be turned on, stop use and
contact
help.Kogan.com
for assistance.
This display is showing
‘HS’.
The appliance has entered its defrosting cycle. Once defrosting
has finished, the display will return to normal.
•
This marking indicates that this product should not be disposed of with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
•
Flammable refrigerants require special disposal procedures. Contact your
local authorities for the environmentally safe disposal of the appliance.
•
Refrigerants must be evacuated before disposal.
TROUBLESHOOTING
Summary of Contents for SMARTERHOME KASMDHM20LA
Page 1: ...KOGAN SMARTERHOME SMART DEHUMIDIFIER 20L KASMDHM20LA ...
Page 34: ...34 NOTES ...
Page 35: ...35 ...