11
Set device in pairing mode
When the device is first turned on, it may automatically
enter pairing mode (red indicator light will be flashing
rapidly).
If not automatically in pairing mode when powered on,
you can manually set the device in pairing mode by long-
pressing the control button until the red indicator light
flashes three times, then continues flashing rapidly.
Add device through network
5.
Once registered, tap “
+
” in the upper right corner of the app’s home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Sensor > Smoke Alarm).
7.
Ensure that the device is in pairing mode, with the red light flashing, and tap
“Confirm light is rapidly flashing”.
