9/16/2020
Kogan W6 True Wireless Earphones - (KAW6TWSBLKA & KAW6TWSWHTA) - Manual – Kogan.com Help Centre
https://help.kogan.com/hc/en-us/articles/360042133454-Kogan-W6-True-Wireless-Earphones-KAW6TWSBLKA-KAW6TWSWHTA-Manual
5/8
To charge the earphones, place both earbuds into the charging case and close the lid. It will
take approximately 1 hour to reach full charge.
Charging the Case
To charge the charging case, connect the supplied USB-A to Micro USB cable to the charging
case and a USB-A power supply or wall charge. It will take approximately 2 hours to reach full
charge. The LED light will ash red while charging, and display solid red when fully charged.
Powering On
When removed from the charging case, the earphones will automatically turn on and attempt
to pair with nearby devices. If not removing from the case, simply short-press the multi-
function button on both earphones simultaneously to power on. To power on just one
earphone, long-press the button. With one earphone powered on, the second can be added
by long-pressing its button to power on – both will then be linked again. A voice will con rm
“power on”.
Pairing to a Device
To pair with a device, power on the earphones in any of the sequences outlined above. When
turned on, the earphones will automatically attempt to pair, with the status indicator lights
ashing red and blue when searching for a connection. In your device’s Bluetooth settings,
ensure Bluetooth is turned on and the device is visible, and then ‘scan’ for available nearby
devices. The earphones will appear as “Kogan W6 TWS” – select from the list of available
devices to pair. When paired successfully, a voice will con rm “connected”.
Powering Off
Returning the earphones to the charging case and closing the lid will automatically turn them
o and commence charging. To manually power o , simply long-press on either earbud’s
button. A voice will con rm “power o ”. We recommend storing the earphones in the charging
case when not in use.