20-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Blower, Heated
Surface:
Technical Information
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
All product dimensions are nominal.
Three-wall alcove
Installation:
Left
Drain location:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
45-1/8" x 19-11/16" (1146 mm x 500 mm)
Basin area, bottom:
52-3/4" x 25-5/16" (1340 mm x 643 mm)
Basin area, top:
106 lbs (48.1 kg)
Weight:
46 lbs/ft² (224.6 kg/m²)
Minimum floor load:
15" (381 mm)
Water depth:
58 gal (219.6 L)
Water capacity:
Blower: 120 V, 10 A, 60 Hz
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Electrical component
rating:
2-3/16" (56 mm)
Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
4-25-2019 16:47 - US/CA
Archer
®
5' BubbleMassage
™
Bath
K-1122-GLAW
