-6-
Note:
Please pre-install Water filtration faucet of Kohler
brand or other brands on the sink. (Refer to Water filtration
Faucet Installation Manual for tools and detailed
installation steps of water filtration faucet. For water
filtration faucet other than Kohler brand, please make sure
the inlet dimension is 1/4" adapter).
(
2
)
Step 1 Pre-install Water Filtration Faucet
(Refer to Figure 1- Figure 3)
(
1- 3)
INSTALLATION & USE METHOD
1. Make sure cold water supply line under the sink is
turned off; (Figure 1)
( 1)
2. Disconnect cold water line from threaded stub on
bottom of tap faucet; (Figure 2)
( 2)
Cold Water Supply Valve
Cold Water Supply Valve
Fig.#1
1
Fig.#2
2
Stub of Tap Faucet
3. Screw the water supply adapter - female threaded stub
to the cold water supply valve male threads as shown.
Hand it tighten and snug with wrench. Screw the
female threaded tap faucet stub to the water supply
adapter;(Figure 3)
( 3)
Fig.#3
3
Stub of Tap Faucet
Water Supply Adapter
4. Install faucet and connect faucet with system's
filter water outlet after machined is installed.
净水
1406034-T01-D
安装及使用方法