3
Kohler Co., Kohler, WI
106701-2-AB
SITE PREPARATION, CONT.
Your new Birthday Bath can be
installed in a free-standing or
wall-mount configuration
depending on your faucet
choice. Refer to the installation
instructions packed with your
faucet.
Make sure the drain location
corresponds to the bath outlet.
Install or relocate supplies as
necessary to conform to the
roughing-in dimensions.
Temporarily cap the water
supplies.
Install the finish flooring and
wall materials.
BATH INSTALLATION
Before installing your new
bath, make sure all
construction is completed.
Remove the bath from the
packing carton and place on a
throw rug or other protective
floor covering to prevent
damage to the bath or floor.
ATTACH BALL AND CLAW
LEGS
Lift outlet end of the bath until
sufficient clearance is obtained
to attach the two front legs.
Insert fastening bolt through
the beveled washer. Make
sure the tapered edge of the
washer faces upward.
Align the leg with the
attachment lug making sure
the load lug is resting on the
flat of the interior leg.
Insert fastening bolt and
tighten.
Repeat procedure for
remaining legs.
Place the bath into position
and adjust the leveling bolts to
ensure a level installation.
Fastening
Bolt
Beveled
Washer
Leveling
Bolt
Attachment
Lug
Bath
Load Lug
