5
• Ensure a watertight seal on the bath drain and plumbing.
• Install the faucet valve according to the faucet manufactuer’s instructions.
• Do not install the faucet trim until instructed.
• Turn on the hot and cold water supplies and check connections for leaks.
INSTALLATION COMPLETE
CLEANING AND CARE
• Use a mild detergent such as liquid dishwashing soap and warm water to clean the bath. Do not use
abrasive cleaners that may scratch or dull the surface.
• Take care to read the label of cleaning products to ensure the cleaner is safe for use with acrylic material.
• Before using an intended cleaning product, test the cleaning solution on an inconspicuous surface.
• Do not allow cleaners to sit or soak into the surface of the bath.
• Wipe surfaces clean and rinse completely with water immediately after cleaner is applied.
• Use a soft dampened cloth or sponge. Never use an abrasive material such as a scouring pad to clean
bath surfaces.
CAUTION: Risk of property damage
IM
RMA
N
SERVICE PARTS
CONTACT AND WARRANTY INFORMATION
For spare parts and warranty information, please visit our website:
New
Zealand
Australia
www.kohler.co.nz
www.kohler.com.au
NEW
ZEALAND AUSTRALIA
KOHLER NZ LTD
KOHLER AUSTRALIA
Ph: 0800 564 537
Ph: 1 800 564 537
Fx: 0800 664 488
Product Code
Descrip
�
on
1466888-*
Evok 2 Bath Drain kit
1022879
Bath foot kit
